|
Official CCM List for Small Services:
Remove sump shield.
Remove frame drain plug in L/H cradle tube and drain oil from frame.
Remove hexagon drain plug from sump of engine, drain engine oil.
Replace drain p1ug firmly and replace sumpshield.
Replace in line filter leaving connection loose. Clean carburettor filter
situated below inlet tube.
Put 2 litres SF or SG oil in frame and bleed to in line filter, tighten
connection. 2000 Model is self bleeding.
Replace engine filter and turn over engine about 20 revolutions to prime
housing before starting.
Start engine and run at fast tickover engine for one minute. Stop engine
Add oil to frame to dipstick level or halfway up sight tube.
Check timing belt for correct tension
Check steering bearings for play, adjust if necessary
Check operation of controls and lighting system.
Check fasteners, spokes and brake connections for security
Check chain slipper pads.
Check carburettor airscrew is 2¼ to 2½ turns out and set tickover if
necessary.
|
